4.1 Amplifier (TDA7294, TDA7265)

Hello guys, in this post I make 4.1 channel amplifier, which can deliver up to 25W output per channel for satellite speakers and 90W output for subwoofer. For this amplifier, I use 2 Pcs. TDA7265 IC and 1 Pcs. TDA7294 IC. TDA7294 IC for subwoofer and TDA7265 IC for satellite speakers. These ICs are specially designed for active studio monitors, for their low noise distortion. So for this reason, these ICs are a little bit more expensive than other IC. For designing my PCB, I used EasyEda online software. Then I export the Gerber file (which you can download). And then I go to www.pcbway.com for manufacturing my PCB. PCBWay are the largest PCB manufacturer in China. They offer Standard PCB, Advanced PCB, Rigid-Flex PCB, SMD-Stencil and PCB Assembly Service. Here you get, 100x100mm 2 Layer PCB only at $5, And processing time within 24 hours. And they distribute, worldwide. The more you order, the less price you have to pay.

You just need to upload the Gerber File, and select the quantity, color, silkscreen, thickness etc. Then select your country, and shipping method and then Pay. PCBWay will deliver your PCB within 7-10 days.

After one week I received my PCB. You can see the PCB quality, it's awesome. I have ordered Black PCB. But you can choose your PCB color. PCBWay provides a total of 9 color solder masks - Green, Blue, Red, Purple, Black, White, Yellow, Matte Black, and Matte Green. On PCBWay you can get 100x100mm 2 Layer PCB only at $5. Maximum size PCB you can get 500x1100mm. And the maximum Layer is up to 14 Layers. And If you order PCB the first time at PCBWay, then you get a $5 discount coupon. So upload your Gerber today and get the best quality PCB.

Gerber File:- https://bit.ly/3OlfvlL

PCB Layout & Schematic:- https://bit.ly/3NNA0Wt

License:- ©Technical Mriganka. You can't use this PCB Layout and Gerber File for commercial purpose. You can use this PCB layout and Gerber file only for Educational and DIY projects.

Testing Method After Complete This Amplifier

Series light test:- After complete this board don't forget to series light test. When you will on this amplifier via series light, it glow for some time (1 - 2 sec). Then series light will turned off fully. If the series light will fully turned off, then check the voltages.

Power Supply:- Recommended transformer 18-0-18V 5A-8A.