400 Watt Class D Amplifier.

Components

1. 1×LM311N IC.
2. 1×IR2153 IC.
3. 1×MJE350 Transistor.
4. 1×MJE13005 Transistor.
5. 2×IRFP260N MOSFET.
6. 2×3.3KΩ resistor 1/4W.
7. 2×33KΩ resistor 1/4W.
8. 3×1KΩ resistor 1/4W.
9. 1×5.1KΩ resistor 1/4W.
10. 1×15KΩ resistor 1/4W.
11. 2×10Ω resistor 1/4W.
12. 1×4.7KΩ resistor 1/4W.
13. 2×2.2 - 4.7KΩ resistor 1W.
14. 2×Zener Diode 1N4740/ 1N4742 1W (10V/ 12V).
15. 1×Zener Diode 1N4744 15V 1W.
16. 2×Zener Diode 1N4148.
17. 1× Ultra Fast Diode SF16/ FR107.
18. 6×0.1uF (104) capacitor 50V/ 100V.
19. 1×0.001uF (102) capacitor 50V/ 100V.
20. 1×100pF (101) capacitor 50V/ 100V.
21. 1×0.0022uF (222) capacitor 50V/ 100V.
22. 3×1uF (105) capacitor 250V/ 400V.
23. 3×47uF capacitor 63V.
24. 1×4.7uF capacitor 63V.
25. 2×10uF capacitor 63V.
26. 5×6.3 mm vertical PCB terminal.
27. 1×2 pin connecter base 2.54 mm.
28. 1×35uH Coil.
29. 2×1000uF capacitor 63V.

License:- ©Technical Mriganka. You can't use this PCB Layout and Gerber File for commercial purpose. You can use this PCB layout and Gerber file only for Educational and DIY projects.

Gerber File:- https://bit.ly/3kqjDAF

PCB Layout:- https://bit.ly/2Wspz3E

Let's Make it

Hello Friends, In this post I make a 400 Watt mono amplifier using 2pcs. IRFP260N MOSFET and IR2153 IC. For analog to digital converter of this amplifier I use LM311 IC. For make coil of this amplifier, must use LCR meter. Because 50% sound clarity is depended on it's coil, and 50% on circuit. For designing my PCB, I used EasyEda online software. Then I export the Gerber file (which you can download). And then I go to www.pcbway.com for manufacturing my PCB. PCBWay are the largest PCB manufacturer in China. They offer Standard PCB, Advanced PCB, Rigid-Flex PCB, SMD-Stencil and PCB Assembly Service. Here you get, 100x100mm 2 Layer PCB only at $5, And processing time within 24 hour. And they distribute, worldwide. The more you order, the less price you have to pay.

You just need to upload the Gerber File, and select the quantity, color, silkscreen, thickness etc. Then select your country, and shipping method and then Pay. PCBWay will deliver your PCB within 7-10 days.

After one week I have received my PCB. You can see the PCB quality, it's awesome. I have ordered Red PCB. But you can choose your PCB color. PCBWay provide total 9 color solder mask - Green, Blue, Red, Purple, Black, White, Yellow, Matte Black and Matte Green. On PCBWay you can get 100x100mm 2 Layer PCB only at $5. Maximum size PCB you can get 500x1100mm. And maximum Layer is up to 14 Layers. And If you order PCB first time at PCBWay, then you get a $5 discount coupon. So upload your Gerber today and get best quality PCB.

How to check after complete

Series light test:- After complete this board don't forget to series light test. When you will on this amplifier via series light, it glow for some time (1 - 2 sec). Then series light will turned off fully. If the series light will fully turned off, then check the voltages.

Check Voltages:- Check Speaker Output and Audio Input voltage. Here you get no voltages 0.00V. If you get same voltages, then connect preamplifier to input and connect speaker to output.

Power Supply:- For get best performance of this amplifier, you use 30-0-30V 10A-12A Transformer.