Ad Code

Subscribe Us

TDA7294 400W Dual Bridge Stereo Amplifier.

Lets Build This Amplifier

Hello Friends, In this post I make a 400 Watt (200+200W) Stereo amplifier using 4 Pcs. TDA7294 IC, which can deliver up to 170 watt RMS output per channel at 4Ω ±35V. The sound quality of this amplifier is very good. All frequencies are very clear. TDA7294 IC is a Hi-Fi professional Audio IC. Many professional singers and audio engineers use the TDA7294 IC amplifier, For its sound clarity. For designing my PCB, I used EasyEda online software. Then I export the Gerber file (which you can download). And then I go to www.pcbway.com for manufacturing my PCB. PCBWay are the largest PCB manufacturer in China. They offer Standard PCB, Advanced PCB, Rigid-Flex PCB, SMD-Stencil and PCB Assembly Service. Here you get, 100x100mm 2 Layer PCB only at $5, And processing time within 24 hours. And they distribute, worldwide. The more you order, the less price you have to pay.


You just need to upload the Gerber File, and select the quantity, color, silkscreen, thickness etc. Then select your country, and shipping method and then Pay. PCBWay will deliver your PCB within 7-10 days.


After one week I received my PCB. You can see the PCB quality, it's awesome. I have ordered Yellow PCB. But you can choose your PCB color. PCBWay provides a total of 9 color solder mask - Green, Blue, Red, Purple, Black, White, Yellow, Matte Black, and Matte Green. On PCBWay you can get 100x100mm 2 Layer PCB only at $5. Maximum size PCB you can get 500x1100mm. And maximum Layer is up to 14 Layers. And If you order PCB the first time at PCBWay, then you get a $5 discount coupon. So upload your Gerber today and get the best quality PCB.

Gerber File :- https://bit.ly/3wn3eTv

PCB Layout & Schematic :- https://bit.ly/3Nn0Gv0

License:- ©Technical Mriganka. You can't use this PCB Layout and Gerber File for commercial purpose. You can use this PCB layout and Gerber file only for Educational and DIY projects.


Testing Method After Complete This Amplifier

Series light test:- After complete this board don't forget to series light test. When you will on this amplifier via series light, it glow for some time (1 - 2 sec). Then series light will turned off fully. If the series light will fully turned off, then check the voltages.

Check Voltages:- Check Speaker Output and Audio Input voltage. Here you get no voltages 0.00V. If you get same voltages, then connect preamplifier to input and connect speaker to output.

Power Supply:- Recommended transformer 24-0-24V 8-10A.

Post a Comment

0 Comments