1000W Class AB Driver with speaker protector

Hello Friends, In this post I make a 1000W class AB Driver. You need to use 10 pairs of 2SC5200 & 2SA1943 transistors and a 50-0-50V 15A Transformer to get 1000W of output. This Driver has an in-built speaker protector. The speaker protector is powered by 12 volts and connected to the amplifier output, if the transistor burns out, this protector will not allow current to flow through the speaker. For designing my PCB, I used EasyEda online software. Then I export the Gerber file (which you can download). And then I go to www.pcbway.com for manufacturing my PCB. PCBWay are the largest PCB manufacturer in China. They offer Standard PCB, Advanced PCB, Rigid-Flex PCB, SMD-Stencil and PCB Assembly Service. Here you get, 100x100mm 2 Layer PCB only at $5, And processing time within 24 hour. And they distribute, worldwide. The more you order, the less price you have to pay.

You just need to upload the Gerber File, and select the quantity, color, silkscreen, thickness etc. Then select your country, and shipping method and then Pay. www.pcbway.com will deliver your PCB within 7-10 days.

After one week I received my PCB. You can see the PCB quality, it's awesome. I have ordered Red PCB. But you can choose your PCB color. PCBWay provides a total of 9 color solder mask - Green, Blue, Red, Purple, Black, White, Yellow, Matte Black, and Matte Green. On PCBWay you can get 100x100mm 2 Layer PCB only at $5. Maximum size PCB you can get 500x1100mm. And maximum Layer is up to 14 Layers. And If you order PCB the first time at PCBWay, then you get a $5 discount coupon. So upload your Gerber today and get the best quality PCB.

Gerber File:- http://bit.ly/3Ul0y4l

PCB Layout & Schematic:- http://bit.ly/43eI2yN

License:- ©Technical Mriganka. You can't use this PCB Layout and Gerber File for commercial purpose. You can use this PCB layout and Gerber file only for Educational and DIY projects.

Testing Method After Complete This Amplifier

Series light test:- After complete this board don't forget to series light test. When you will on this amplifier via series light, it glow for some time (1 - 2 sec). Then series light will turned off fully. If the series light will fully turned off, then check the voltages.

Check Voltages:- Bias volt 0.5V to 0.7V. Check Speaker Output and Audio Input voltage. Here you get no voltages 0.00V. If you get same voltages, then connect preamplifier to input and connect speaker to output.

Power Supply:- You need to use 10 pairs of 2SC5200 & 2SA1943 transistors and a 50-0-50V 10A-15A Transformer to get 1000W of output.